Reboot Sequences; Suspend / Resume; Cold Boot / Restart; Clean Boot / Reset - LXE MX7 Tecton Reference Manual

Reboot Sequences

Reboot Sequences
When the Windows Mobile Today panel is displayed or an application begins, the power up sequence is complete. If you have
previously saved your settings, they will be restored on reboot. Application panel changes are saved when ok is tapped on an
application properties panel.
Note: There is no Warm Boot/Warm Start/Warm Reset (as used in other versions of Microsoft operating systems)
function available for Windows Mobile devices. Suspend/resume performs the equivalent function.
During the processes that follow there may be small delays while the wireless client connects to the network and Bluetooth
relationships establish or re-establish.

Suspend / Resume

Quickly tapping the Power key places the MX7 Tecton in Suspend mode. Quickly tapping the Power key again, pressing any
key, pressing the trigger (on the trigger handle), or tapping the touchscreen, returns the MX7 Tecton from Suspend.
or
Hold down the Power key and then the Enter key until the screen blanks. Release the keys and the MX7 Tecton resumes.

Cold Boot / Restart

Temporary data not saved is lost. All programs are re-launched, programs installed from CAB files are reinstalled. Previously
saved user settings are restored. Restart may also be called cold boot. Hold down the Blue key, the Scan key and the Power
key until the screen blanks. Release the keys and the MX7 Tecton cold boots.
Be sure to press the Scan key not the Enter key. Pressing the Enter key begins a suspend/resume function instead of a cold
boot function.

Clean Boot / Reset

Important -- Because of the extreme nature of resetting the MX7 Tecton to factory default settings, LXE recommends that this
process be used only as an emergency procedure and suspend/resume or cold boot be used whenever necessary.
To reset all MX7 Tecton configuration to factory defaults:
1. Hold down the Blue + Scan + Power keys at the same time. After the keypress, the display turns solid white. Be sure to
press the Scan key, not the Enter key.
2. Release the keys and immediately press and hold the Enter + Scan keys. After the keypress, the display turns dark. (If
these keys are not pressed immediately the MX7 Tecton performs a Cold Boot. Wait until the MX7 Tecton boots and try
again.)
3. Release the Reset keys. A message is displayed at the bottom of the display stating the change is in process. If the
message does not appear, please try again.
When all programs have finished loading, the Windows Mobile Start screen is displayed. If prompted, tap the touchscreen to
set up your Windows Mobile based device.
E-EQ-MX7WMRG-A [ 9 ] MX7 Tecton™ for Windows Mobile Reference Guide