Wireless Network Configuration For Lxe Devices; Important Notes; Summit Client Utility - LXE MX7 Tecton Reference Manual

The Summit client device is a Summit 802.11a/b/g radio, capable of 802.11a, 802.11b and 802.11g data rates.The radio can be
configured for no encryption, WEP encryption or WPA security.
Security Options Supported are
None
l
WEP
l
LEAP
l
WPA-PSK
l
WPA/LEAP
l
PEAP-MSCHAP
l
PEAP-GTC
l
EAP-TLS
l
EAP-FAST
l

Important Notes

It is important that all dates are correct on the MX7 Tecton and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.
Verify and adjust the date using the
It may be necessary to upgrade radio software in order to use certain Summit Client Utility (SCU) features.
Contact your
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domains
in which the U-NII 3 band is allowed, the following channels are supported: 149, 153, 157 and 161. The AP must
be configured accordingly.
After making any changes to the wireless configuration, perform a Suspend/Resume on the MX7 Tecton.

Summit Client Utility

Note: When making changes to profile or global parameters, tap the power key to place the MX7 Tecton in Suspend.
When the MX7 Tecton resumes from suspend the parameters are applied. The MX7 Tecton can be resumed by tapping
the power key or the touchscreen or by pressing any key.
Start | Settings | System | Wi-Fi or
Summit Tray Icon (if present)
The Main Tab provides information, admin login and active profile selection.
Profile specific parameters are found on the
The Status Tab contains information on the current connection.
The Diags Tab provides utilities to troubleshoot the radio.
Global parameters are found on the
E-EQ-MX7WMRG-A [ 247 ] MX7 Tecton™ for Windows Mobile Reference Guide

Wireless Network Configuration for LXE Devices

Clock & Alarms
LXE representative for details.
Profile
Global Tab. The values for these parameters apply to all profiles.
panel.
Tab. The parameters on this tab can be set to unique values for each profile.