Gas Adjustment (Conversion To Lpg For The Hob Top) - Baumatic BCG620SS Instruction Manual

remove the blanking plug and refit it to the opposite side to
where the hose is being connected.

Gas adjustment (Conversion to LPG for the hob top)

All work must be carried out by a GASSAFE
registered engineer.
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
o Remove the pan supports, burner cap and burner rings.
o Unscrew the injector and replace it with the required injector for
the new gas supply according to the table below.
Burner Type
Auxillary (Small)
Semi Rapid
(Medium)
Rapid (Large)
o When all four jets have been replaced, reassemble all the
burners carefully, taking particular care to make sure that the
burners and burner caps are aligned properly.
o After changing the injectors YOU MUST change the minimum
flow rate.
Gas Type Pressure
Mbar
Natural 20
Gas
Liquid Gas 28..30/37
Natural 20
Gas
Liquid Gas 28..30/37
Natural 20
Gas
Liquid Gas 28..30/37
31
Injector
Marking
(1/100mm) Max Min
72
50
97 1.75 0.6
65
115
85
Power
(Kw)
1 0.3
3 1