Gas Adjustment (Conversion To Lpg And Flow Adjustment) - Baumatic BT3060SS User Manual

Gas adjustment (Conversion to LPG and flow adjustment).

All work must be carried out by a CORGI registered
engineer.
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
This appliance is adjusted for NATURAL GAS at 20 mbar ONLY.
The hob is suitable for conversion to Liquid Petroleum Gas BUTANE
(G30) at 28 – 30 mbar and PROPANE (G31) at 37 mbar by following
the procedure below and using the conversion kit supplied.
o Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
o IMPORTANT: You must follow the minimum flow adjustment
for hob gas taps procedure on the next page before using the
appliance.
o Remove the pan-stands, burners and
flame spreaders.
o Unscrew the injector using a
7 mm
replace it with the stipulated
injector for the new gas
supply (see table below).
40
socket spanner and