Gas Adjustment (Conversion To Lpg And Flow Adjustment) - Baumatic Royal Chiantishire BRC2BDY User Manual

Gas adjustment (Conversion to LPG and flow adjustment).

All work must be carried out by a CORGI registered
engineer.
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
o Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
o Remove the pan-stands, burners and
flame spreaders (A).
o Unscrew the injector (B) and replace it
with the stipulated injector for the new g
supply (see table below).
as
29