Using The Battery; Charging And Installing The Battery - Intermec IP30 User Manual

Using the Battery

Charging and Installing the Battery

IP30 Handheld RFID Reader User's Guide
The IP30 uses the Model AB3 and Model AB19 batteries as a main
power source.
You must use the Model AB19 (P/N 318-037-001) battery for NI
environments where flammable and explosive gases and vapors
may be present.
The battery used in this device may present a fire or chemical
burn hazard if it is mistreated. Do not disassemble it, heat it,
above 100C (212F), or incinerate it.
Disposed of used batteries promptly. Keep away from children.
Contact your Intermec representative for replacement batteries.
To charge the IP30 battery you need to have a power supply
(P/N 851-082-103), a country specific power cord, and one of these
chargers or accessories:
• AC6 2-Bay Charger (P/N 852-907-001)
AC7 4-Bay Charger (P/N 852-908-001)
•
• AC20 Quad Charger with IP30 Battery Pack Adapter
(P/N 871-233-001)
• AD20 Single Charger with IP30 Battery Pack Adapter
(P/N 871-233-001)
The IP30 does not ship with any of these accessories. For more
information on these accessories, contact your local Intermec sales
representative.
Chapter 1 — Getting Started
7