Charge The Battery - Intermec SF61 User Manual

Charge the Battery

SF61 Cordless Scanner User's Guide
SF61B Model Type: The model type of your SF61B is indicated in the first part
of the configuration number. In this illustration, the model type is SF61BHP-
Sxxxx for high performance 2D imager.
The SF61B uses a lithium-ion battery as its main power source. You
need to fully charge the scanner before using it.
The battery pack used in this device may ignite, create a chemical
burn hazard, explode, or release toxic materials if mistreated. Do
not incinerate, disassemble, or heat above 100°C (212°F). Do not
short circuit; may cause burns. Keep away from children.
Use only Intermec battery pack Model 1016AB01 (P/N SF61-
BAT-Sxxx). Use of incorrect battery pack may present risk of fire
or explosion. Promptly dispose of used battery pack according to
the instructions.
The SF61B can be charged using various types of charger (1-bay
charger, 4-bay charger, FlexDock 4-scanner charger, a vehicle power
adapter). See the Accessories
more details.
Chapter 1 — About the SF61B Cordless Scanner
Intermec Technologies Corp.
Everett, WA USA
5V 1.7A
MODEL, MODELO, ,
1016SP01B
MFD, , : YYYYMMDD
BDA: XXXXXXXXXXXXXX
CN: XXXXXXXXXXXXXX
SN: XXXXXXXXXXX
section at the end of this chapter for
:
SF61BHP-Sxxxx
3