Intermec IP30 User Manual page 27

IP30 Handheld RFID Reader User's Guide
b Configure the IP30. For help, see
Settings" on page 27.
If you are using the AR7 Common Access Card Reader:
a Insert the AR7 into the docking connector until it snaps into
place.
b Insert the right-angle USB cable into the USB port located on
the bottom of the AR7.
c Wrap the Velcro
cable.
6 Configure the IP30. For help, see
on page 27.
"Configuring RFID
TM
strap around the AR7 to secure the USB
"Configuring RFID Settings"
Chapter 1 — Getting Started
17