Introducing The Ip30 - Intermec IP30 User Manual

Chapter 1 — Getting Started

Introducing the IP30

2
The IP30 allows you to connect via Bluetooth or USB. Together, the
IP30 and your mobile computer provide a high-performance mobile
RFID solution that allows you to bring the read/write device to the
tagged product rather than moving tagged products past a fixed
reader.
The IP30 supports the following mobile computers:
• CN3B and CN3F Mobile Computers. CN3 WAN configurations
are not supported with the IP30.
• CN4 Series Mobile Computer.
• CK3 Series Mobile Computer.
CK61 and CK61ex Series Mobile Computers.
•
Note: When paired with CN4NI and CN4ENI products, the IP30
supports North America NI, Division 2, Class I, II and III as defined in
ANSI/ISA 12.12.01 for operation in environments where flammable
and explosive gases and vapors may be present.
The Bluetooth Version of the IP30 Attached to the CN3
IP30 Handheld RFID Reader User's Guide