Minolta Di250 Operator's Manual page 38

2-20
5. Placing Originals
Loading the Originals
Slide the Document Guide Plate to the size of
1
the originals.
<Duplexing Document Feeder>
<Automatic Document Feeder>
Useful Tip
When using large size originals, flip up the
extenders.
Load a neat stack of originals face up on the
2
Document Feed Tray.
<Duplexing Document Feeder>
<Automatic Document Feeder>
NOTES
• The maximum number of originals that can be
loaded
Duplexing Document Feeder: Up to 50
Automatic Document Feeder: Up to 70
• It is possible for the copier to perform
subsequent scanning of a document set that is
larger than the maximum allowed on the
Document Tray.
• Make sure that the top level of the original
2$$
stack does not exceed the
• Make sure that the Document Guide Plate is
in touch with the edges of the original stack. If
Extender
it's not pressed snugly against the original
stack, skewed feeding could result.
• You can make copies automatically from
originals of assorted sizes loaded on the
Document Feeder.
• When loading the originals, make sure to
select the Original Direction.
2$$
3 Press the Start Key to scan the originals in
the tray.
2$%
2$&
p. 3-52
marking.
p. 2-24
p. 3-26