Table of Contents
Advertisement
With the Seal on the Toner Bottle facing up,
5
slowly peel off the Seal as illustrated.
NOTE
Be careful, some toner may puff out from the
bottle.
With the "UP" marking on top, insert and
6
push the Bottle into position.
NOTE
Push the Bottle up to the black line on it.
Close the Toner Bottle Cover.
7
2. When the Message "Add Toner." Appears
NOTES
• Use ONLY the specified toner for this copier.
Using any other toner could result in trouble.
• Do not throw away, but keep, the used Toner
Bottle which will be collected by your Tech.
Rep.
• Be careful not to drop the Toner Bottle from a
3 feet or more height. It may cause damage to
the Toner Bottle.
1139O1390A
• When the Toner Bottle Cover is closed, the
copier automatically starts replenishing the
supply of toner. During this period, do not
attempt to turn OFF the Power Switch or open
the Right Door.
Toner Replenisher
Use the Toner Replenisher function available
from the Utility Mode if the image is light
immediately after the Toner Bottle has been
replaced with a new one.
1166O219AA
1166O096AA
5-11
p. 4-16
Advertisement
Table of Contents
