What Does Each Message Mean - Minolta Di250 Operator's Manual

5-30

8. What Does Each Message Mean?

What does each message mean?
Message
A malfunction was detected.
The SMART controller has
called your Technical
Representative.
Please add toner.
The Imaging Unit needs to be
changed. Call your technical
representative.
Stapler empty. Replace Staple
Cartridge or cancel Staple
mode.
1168P189CC
Return the following number of
originals to Document Feeder.
××××
Cannot : not enough free
memory.
Image data has caused memory
overflow. Your copy job has
been canceled.
This mode cannot be selected
××××
with the .
Cause
The copier malfunctioned and
is unable to make copies.
Toner has run out and the
copier is unable to make copies.
The PC Drum has reached its
service life and the copier is
unable to make copies.
The staples have run out.
The time has come when the
copier needs service.
After a misfed sheet of paper
has been cleared, you need to
reload the originals fed out onto
the Document Exit Tray onto
the Document Feed Tray.
The copier is unable to scan the
data for lack of memory space.
The copier is unable to scan the
data for lack of memory space.
You have set two functions that
conflict with each other.
Action
Call and inform your Technical
Representative of the code
being shown on the Touch
Panel.
Replace the Toner Bottle with a
new one.
(When the Message "Add
Toner." Appears p. 5-10)
Call your Technical
Representative.
Reload the Staple Cartridge
with a new clip.
(When the Message "Stapler
Empty." Appears p. 5-14)
Call your Technical
Representative.
Add the number of originals
indicated to the bottom of the
remaining stack and reload.
Wait until a print cycle is run or
erase a reserved job to make
room for new data.
Wait until a print cycle is run or
erase a reserved job to make
room for new data.
Cancel either one of the two
functions.