Table of Contents
Advertisement
BUILT-IN HARD DISK
Operating display
When the power for the digital video recorder is turned on, the operating display appears in the upper-left corner of the monitor screen. This operating
display shows information which is essential for operation, such as the date, time, picture quality and recording speed.
1
Camera number display
Connect the digital video recorder to a multiplexer that is capable of
decoding Sanyo's channel information (camera number) and press
the CHANNEL button. The number of the specified camera appear in
the display during playback.
2
Date display
When the digital video recorder is first turned on, the date appears as
01-01-01 (month, day, year). Make sure that you use the menus to
set the correct date.
3
Operating symbol display
These symbols appear during recording and playback.
a
e : Fast forward
: Recording
c
f : Rewind
: Playback
d
h
: Reverse playback
hc : Slow playback
dh : Slow reverse playback
Note: If recording and playback are being carried out at the same
time, the playback symbol (c) appears.
4
Amount of recording area remaining
If overwriting has been disabled (OVERWRITE: OFF) in the normal
recording area or alarm recording area, the amount of space
remaining appears as a percentage. You can change the amount of
recording area remaining using the RECORDING CONDITIONS SET
menu item. (See page 45.)
5
Alarm display and alarm number display
When an alarm setting is made using the ALARM REC MODE SET
menu item, The following display appears in the alarm display.
However, the PRE display appears when pre-alarm recording has
been set. When an alarm occurs, the PRE is replaced by ALARM
and the number of alarms also appears. The alarm display shows the
cumulative number of alarms.
•
If ALARM RECORDING is set: ALARM appears.
ALARM flashes while an alarm is being recorded.
•
If PRE-ALARM RECORDING is set: PRE appears.
•
When playing images from the archive area: ARCHIV appears.
English
1
2
3
4 5
4CH
100%
01-01-01 ALARM 0000
00:00:00 EN 0.10SEC
6
7
8
: Stopped
01-01-01 ALARM 0000
00:00:00 EN 0.10SEC
6
Time display
When the digital video recorder is first turned on, the time appears as
00:00:00, and the time starts counting after the date has been set.
The digital video recorder uses the date and time to control recording
and playback, so if the date and time have not been set, the correct
images cannot be retrieved. Make sure that you use the menus to
set the correct time.
7
Picture quality display
This shows the picture quality for images that are recorded on the
hard disk. The default setting is EN (Enhanced). The display
changes when the picture quality is changed using the NORMAL
REC MODE SET menu item.
•
BA: Basic
•
NO: Normal
•
EN: Enhanced
•
FI: Fine
•
SF: Super Fine
8
Recording speed display
This displays the recording speed for images that are recorded on
the hard disk. The default setting is 0.10 SEC (during field recording).
The display changes when the picture quality and recording method
are changed using the NORMAL REC MODE SET menu item.
Note: During recording with this unit, playing back, copying
and transferring pictures is possible. However,
because of the recording priority the response of the
other operations becomes slower.
11
Advertisement
Table of Contents
