Table of Contents
Advertisement
RECORDING IMAGES IN THE ALARM RECORDING AREA
When an alarm is received, pre-alarm recording stops
4
automatically and the alarm images are recorded.
The "PRE" disappears from the operating display, "ALARM" flashes and the
ALARM indicator flashes.
ALARM
Note: When the remaining area in the alarm recording area reaches 1%, the
English
ALARM FULL indicator on the front panel flashes. If recording is continued
under these conditions, the recording area is filled and the recording stops.
In the RECORDING AREA SET settings, carry out the AREA FULL
RESET operation for the normal recording area.
Recording will then be possible from the beginning again. (See page 44.)
17
10-06-01 ALARM 0000
09:30:15 EN 0.10SEC
POWER
FULL
ALARM FULL
LOC
Advertisement
Table of Contents
