Motion Detection Search - Sanyo DSR-3000 Instruction Manual

SEARCHING FOR RECORDED IMAGES

Motion detection search

When a motion sensor is set for images recorded in the normal recording area (normal recording and timer recording images) or for images recorded
in the alarm recording area of the hard disk, you can search for images that have changed because of the entry of a suspicious person, for instance,
and play back only those images.
Note:
•
If carrying out motion detection searches of multiplexer images, change the setting for MULTIPLEXER in the VIDEO INPUT SET menu to
something other than "NO USE".
•
If the digital video recorder is connected to a Sanyo multiplexer that allows decoding of channel information (camera numbers), channels can be
specified so that only images from those channels are searched for. If any other type of multiplexer is connected, this setting is not possible.
Press the SEARCH FRAME/FIELD button during recording
1
or when the digital video recorder is stopped.
SEARCH The SEARCH screen appears.
FRAME/FIELD
Use the jog dial to select MOTION DETECTION SEARCH and
2
then turn the shuttle dial clockwise.
The MOTION DETECTION SEARCH screen appears.
Use the jog dial to select SEARCH FROM and then turn the
3
shuttle dial clockwise.
The ALARM display flashes.
Use the jog dial to select the recording area (example:
4
NORMAL), and then turn the shuttle dial clockwise.
The cursor moves to CHANNEL.
Note: If the setting for MULTIPLEXER in the VIDEO INPUT SET menu is set to
Examples of recording area selection:
•
•
•
Turn the shuttle dial clockwise, use the jog dial to select the
5
camera number (example: 4), and then turn the shuttle dial
clockwise.
The cursor moves to START PREVIEW.
English
"NO USE", the cursor will move to START PREVIEW.
ALARM: Only images in the alarm recording area are searched.
NORMAL: Only images in the normal recording area are searched.
ALARM & NORMAL: Images in both the alarm recording area and the
normal recording area are searched.
29
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
<MOTION DETECTION SEARCH>
SEARCH FROM : ALARM
START : -------- --:--
END : -------- --:--
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
<MOTION DETECTION SEARCH>
SEARCH FROM : NORMAL
START : 10-28-01 08:00
END : 10-28-01 20:00
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
<MOTION DETECTION SEARCH>
SEARCH FROM : NORMAL
START : 10-28-01 08:00
END : 10-28-01 20:00
CHANNEL : 4
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE