Copying Images From Archive Area To A Compactflash Card - Sanyo DSR-3000 Instruction Manual

SAVING (COPYING) RECORDED IMAGES
Use the jog dial to select ARCHIVE AREA and then turn the
4
shuttle dial clockwise.
The cursor moves to HOW MANY.
Turn the shuttle dial clockwise, use the jog dial to change
5
the setting to "10", and then turn the shuttle dial clockwise.
The cursor moves to PICTURES.
Use the jog dial to select the SECONDS setting, and then
6
turn the shuttle dial clockwise.
•
•
•
The cursor moves to START.
Turn the shuttle dial clockwise.
7
Copying of images to the archive area starts. When copying is complete, "COPY
FINISHED" appears.
Note: If you press the COPY button while copying is in progress, copying is

Copying images from archive area to a CompactFlash card

Insert a CompactFlash card into the CompactFlash slot on
1
the front panel.
When inserting the CompactFlash card, make sure that the direction of insertion
is correct.
A microdrive can also be used for copying images.
(Inserting)
Display an image from the archive area as a still image, and
2
then press the COPY button.
The copying screen appears.
COPY
Refer to page 28 for details on playing back images from the archive area.
Use the jog dial to select COPY TO and then turn the shuttle
3
dial clockwise.
The ARCHIVE AREA display flashes.
English
PICTURES: Specify the number of images to be copied.
SECONDES: Specify the number of seconds of images to be copied.
MINUTES: Specify the number of minutes of images to be copied (up to 60
minutes).
canceled.
1
2
3
(Removing)
3
2
1
33
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
COPY TO : ARCHIVE AREA
HOW MANY : 10 PICTURES
COPY TO : ARCHIVE AREA
HOW MANY : 10 PICTURES
START ->
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
START ->
CHANGE WITH JOG. SET WITH SHUTTLE
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
START ->
CHANGE WITH JOG. SET WITH SHUTTLE