Table of Contents
Advertisement
BUILT-IN HARD DISK
When the power for the digital video recorder is turned on, the operating display appears at the top of the monitor screen. This operating display
shows information which is essential for operation, such as the date, time and picture quality.
2
Operating display
Insert the power cord into a wall outlet and turn
on the power.
The POWER indicator illuminates, and after approximately 15
seconds the EXIT/OSD indicator illuminates. The camera images then
appear on the monitor screen and the operating display appears at
the top of the screen.
Note: If you press the EXIT/OSD button repeatedly, you can change
the display position for the operating display or make it
disappear.
1
Camera number display
This displays the number of the camera that is currently being
played back or monitored.
2
Operating symbol display
These symbols appear during recording and playback.
REC : Recording
c
: Playback
d
: Reverse playback
h
: Stopped
Note: If recording and playback are being carried out at the same
time, the playback symbol (c) appears.
3
Alarm display and alarm number display
When an alarm setting is made using the ALARM REC MODE
SET menu item, The following display appears in the alarm display.
However, the PRE display appears when pre-alarm recording has
been set. When an alarm occurs, the PRE is replaced by ALARM
and the number of alarms also appears. The alarm display shows
the cumulative number of alarms.
If ALARM REC MODE SET is set: "ALARM" appears.
The "ALARM" display flashes during alarm recording.
If PRE ALARM RECORDING is set: "PRE" appears.
When playing images from the archive area: ARCHIVE
appears.
When an external alarm is received: "EA" flashes to the left of
the camera number.
When a motion sensor alarm is received: "SA" flashes to the
left of the camera number.
English
1
3
4
5 6
e : Fast forward
f : Rewind
hc : Slow playback
dh : Slow reverse playback
7
8
4
Amount of recording area remaining
"REPEAT" appears when overwriting is enabled. Furthermore, if
overwriting has been disabled (OVERWRITE: OFF) for the normal
recording area and the alarm recording area, the amount of space
remaining appears as a percentage.
You can change the amount of recording area remaining using the
RECORDING AREA SET menu item. (See page 51.)
5
Picture quality display
This shows the picture quality for images that are recorded on the
hard disk. The default setting is EN (Enhanced). The display
changes when the picture quality is changed using the NORMAL
REC MODE SET menu item.
BA: Basic
NO: Normal
EN: Enhanced
FI: Fine
SF: Super Fine
6
Audio recording display
"A" appears when audio recording is enabled. See page 54 for
details on the audio recording settings.
7
Date display
When the digital video recorder is first turned on, the date appears
as 01-01-02 (day, month, year). Make sure that you use the
menus to set the correct date.
8
Time display
When the digital video recorder is first turned on, the time appears
as 00:00:00, and the time starts counting after the date has been
set. The digital video recorder uses the date and time to control
recording and playback, so if the date and time have not been set,
the correct images cannot be retrieved. Make sure that you use
the menus to set the correct time. If this is not set, recording will
not be possible.
Note: During recording with this unit, playing back,
copying and transferring pictures is possible.
However, because of the recording priority the
response of the other operations becomes slower.
13
Operating display
Advertisement
Table of Contents
