Security Lock Set Setting; Operating Privileges And Security Lock; A Administrator Password Setting - Sanyo DSR-3000 Instruction Manual

SECURITY LOCK SET SETTING

Passwords for this digital video recorder can be set by the Administrator or the User or both. Setting passwords enables privileges to
be set for recording and playback operations. After the security lock has been set, if someone other than the password setter touches
an operating button on the unit, the buzzer will sound and a password must be entered. Therefore, be sure to make a note of the
password.
Main menu 2
<MAIN MENU 2>
1.DISPLAY SET/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET ->
3.BUZZER SET ->
4.SECURITY LOCK SET ->
5.NETWORK SET ->
6.HDD SET ->
7.POWER FAILURE/USED TIME ->
TO MAIN MENU 1 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE

Operating privileges and security lock

A
Administrator password setting
Example: To set the password to "123456AB"
1
Press the MENU button twice to display the MAIN MENU 2
screen.
The cursor moves to DISPLAY SET/VIDEO LOSS SET.
MENU
2
Use the jog dial to move the cursor to the SECURITY LOCK
SET setting, and then turn the shuttle dial clockwise.
The SECURITY LOCK sub-menu appears, and the cursor moves
to ADMIN.
Note:
•
"LEVEL PASSWORD (4-8) USE" is a title and cannot be changed.
•
If ADMIN is set to "OFF", the user password cannot be set.
•
The password can consist of between four and eight alphanumeric
characters.
English
Sub-menus
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
61
Sets the Administrator level and User
level security locks.
3
Turn the shuttle dial clockwise.
The first password entry bar flashes.
4
Use the jog dial to display "1", and then turn the shuttle dial.
The second password entry bar flashes.
•
The characters that can be used in the password are: 0, 1, ...
9, A, B, C, ... Z
5
Use the jog dial to display "2", and then turn the shuttle dial.
The third password entry bar flashes.
6
Repeat this procedure to continue entering "3456AB", and
then turn the shuttle dial clockwise.
The cursor moves to "OFF" and flashes.
ADMIN -------- OFF
ADMIN 1------- OFF
ADMIN 12------ OFF
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB OFF
USER -------- OFF
REC CONTROL : ADMIN