Table of Contents
Advertisement
SECURITY LOCK SET SETTING
C
Recording and playback operating privilege
setting
Selection of operating privilege
The available operations vary depending on the ON/OFF and
ADMIN/USER settings.
Selection
conditions
All operations are locked. When the user
LEVEL
PASSWORD(4-8)
USE
password is entered at the password entry
ADMIN
123456AB
ON
USER
AB123456
ON
screen, only playback operations can be
REC CONTROL
: ADMIN
carried out. When the Administrator password
is entered, all operations can be carried out.
All operations are locked. When the user
ADMIN
123456AB
ON
password is entered at the password entry
USER
AB123456
ON
screen, only playback and recording operations
REC CONTROL
: USER
can be carried out. When the Administrator
password is entered, all operations can be
carried out.
Recording and menu operations are locked.
ADMIN
123456AB
ON
Playback operations are not locked. When the
USER
--------
OFF
REC CONTROL
: ADMIN
Administrator password is entered, all
operations can be carried out.
Menu operation is locked. Recording and
ADMIN
123456AB
ON
playback operations are not locked. When the
USER
--------
OFF
REC CONTROL
: USER
Administrator password is entered at the
password entry screen, all operations can be
carried out.
Security lock is not engaged (default setting).
ADMIN
--------
OFF
USER
--------
OFF
REC CONTROL
: ADMIN
Security lock is not engaged (default setting).
ADMIN
--------
OFF
USER
--------
OFF
REC CONTROL
: USER
1
Use the jog dial to move the cursor to REC CONTROL.
2
Turn the shuttle dial clockwise, and then use the jog dial to
select "ADMIN" or "USER".
This completes the setting.
3
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
English
Details of operation
<SECURITY LOCK>
LEVEL
PASSWORD(4-8)
USE
ADMIN
123456AB
ON
USER
AB123456
ON
REC CONTROL
: ADMIN
<SECURITY LOCK>
LEVEL
PASSWORD(4-8)
USE
ADMIN
123456AB
ON
USER
AB123456
ON
REC CONTROL
: ADMIN
D
Security lock setting
1
At the normal monitoring screen, press and hold the
SUHTTLE HOLD button for approximately 3 seconds.
The LOCK indicator at the front panel illuminates and the buzzer
sounds. The security lock is then set.
SHUTTLE HOLD
2
Press any operating button to check the security lock.
The password entry screen appears.
The screen display disappears after 5 seconds.
REC/STOP
3
Use the jog dial and the shuttle dial to enter the password,
and then turn the shuttle dial clockwise once more.
The LOCK indicator goes off and the display returns to the
normal screen.
Note: Enter the password (example: "123456AB") that was entered as
the Administrator or User password setting.
2
1
63
POWER
FULL
ALARM FULL
SECURITY LOCKED !
PLEASE ENTRE YOUR PASSWORD
--------
CHANGE WITH JOG. SET WITH SHUTTLE
3
SECURITY LOCKED !
PLEASE ENTRE YOUR PASSWORD
********
LOCK
LOCK
LOCK
CHANGE WITH JOG. SET WITH SHUTTLE
LOCK
LOCK
LOCK
LOCK
Advertisement
Table of Contents
