Receiving A Call; Change Ptt Volume - Alcatel OmniPCX Office IPTouch MIPT 300 User Manual

7.6

Receiving a call

Upon receiving a PTT transmission, the phone plays the 'receiving alert' sound and enters the receive state. In this state the phone
receives all conversations on the selected channel. The phone will ignore the Talk key while in the receive state. The screen shows
the current active channel, the caller ID information of the current transmitter, and an indication that the phone is receiving a
broadcast transmission. During a 'PBX' conversation, the MIPT 600 is not able to receive a PTT transmission. At the end of a
transmission, the phone enters the waiting state where it monitors the channel for up to 10 seconds and displays 'Waiting' on the
screen. If no other transmission occurs within 10 seconds the phone plays the 'end call' sound and reverts to idle state.

Change PTT volume

7.7
Use the Up and Down buttons to raise or lower PTT volume.
Muting a PTT call
7.8
To mute a current call, the receiver can press the Mute soft key. This brings up a Mute prompt. Press the Yes or No soft key.
The prompt disappears after 3 seconds if the user doesn't confirm either Yes or No. Mute mode only affects the current call and
the phone will play subsequent PTT calls. Mute does not allow the user to use the wireless telephone's keypad for anything else,
including an OAI application. The Mute soft key turns into an Unmute soft key while in the mute state and can be used to unmute
the PTT call (the confirmation prompt is displayed first). When the next PTT call period starts the audio is automatically unmuted.
Push to Talk (Mobile IP Touch 600 only)
26