STANDBY MODE
In standby mode, the handset phone number, battery level
displayed.
RECEIVING A CALL
When the handset rings, if the caller ID function is activated, caller information is
displayed after the first ring.
1. Press call key
you press call key , the call timer is started.
2. The call begins.
3. Press end key
MAKING A CALL
Standard Dialing
1. Press call key , and wait for the dial tone.
2. Enter the recipient phone number. The number is displayed.
3. Press end key
Preview Dialing
You can enter the phone number first, and check if it is correct before dialing.
1. Enter the recipient phone number. The number is displayed.
2. To edit the phone number, press left
return to standby mode, press end key .
3. Press call key
DURING A CALL
Call Timer
When you press call key , the call timer is started.
Adjusting the Volume
During a call, press up /down
volume is displayed.
Call Waiting
During an external call, a second incoming call is indicated by a short beep.(The call
waiting tone function must be ON)
1. When you hear the call waiting tone, if you want to take this incoming call, press
end key
to end the call.
2. The handset will rings, press call key
Press end key
3.
to receive the call. The call in progress symbol
to end the call.
to end the call.
to make the call.
key to adjust among the 4 volume levels. The current
to end the call.
key to erase. To erase all numbers and
to receive this new incoming call.
28
, and signal strength
is displayed. When
are