Using Your Telephone - Alcatel OmniPCX Office IPTouch MIPT 300 User Manual

Using your telephone

1
Switch on your telephone
1.1
Press the on/off-hook key until you hear two beeps.
Switch off your telephone
1.2
Press the off/on-hook key until you hear a beep (the telephone must not be in communication).
Making a call
1.3
OR
dial directly lift the number
the number receiver required
for your call
To make an external call, dial the outside line access code before dialling your
correspondent's number. 9 is the default code for an outside line.
For the operator, dial '0' (by default).
Receiving a call
1.4
lift the receiver
Other
Calling your correspondent by name (company directory)
1.5
MENU
OR
press the 'Call by
name ' key
OK
select the name from
the displayed list
* You enter your contact's name in predictive text mode. In this mode, enter each letter
of the name by pressing only once on the key with this letter.
Make a call using the personal phone book
1.6
OK
MENU Indiv.rep.
Redialling
1.7
Call back on the last 10 number dialled:
OK
MENU Rediallist
7
OK
Dialbyname
first letters of your
correspondent's
name*
OK OK
select the contact to call start the call
OK
select the No. in start the call
the last ten
issued