Alcatel OmniPCX Office IPTouch MIPT 300 User Manual page 21

5
Programming an appointment reminder
5.8
You can define the time of a temporary reminder (one in 24 hours) or a permanent reminder (every day at the same time).
•
Programming an appointment reminder:
OK
MENU Appointment MENU
• At the programmed time, your telephone rings:
OK
OR
• To cancel your appointment call-back request:
OK
MENU
Appointment
select the type of
appointment
(temporary or
permanent)
Lock / unlock your telephone
5.9
• Lock / unlock your telephone:
OK
MENU Lock
enter your personal
•
Locking the keypad:
OK
FCN Lock Keys
Programming your telephone
OK
select the type of enter time of
appointment appointment
(temporary or
permanent)
OK
MENU Clear
enter the reminder time
your telephone is
locked/unlocked
password
•
Lock the keypad automatically:
you can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
FCN
Phone Options
•
Unlocking the keypad
#
Configure the set according to the background noise (Noise mode)
5.10
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
OK
FCN
• Normal: corresponds to most office environments.
• High: corresponds to an average level of background noise.
• Severe: corresponds to an extremely high level of background noise.
Activate/deactivate the Key tones
5.11
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
FCN
Enable tones
21
OK OK
Keypad autolock
OK OK
Noise mode
Phone Options
OK OK
Key tones
Phone Options
OK
Desable tones
OR
Select the time
period before
the automatic
locking