Adjusting The Volume; Adjusting The Volume Level Of The Tones - Alcatel OmniPCX Office IPTouch MIPT 300 User Manual

Push to Talk (Mobile IP Touch
600 only)
The Push-to-talk feature allows the Mobile IPTouch 600 to operate in a push-to-talk (PTT) group broadcast mode in addition to
the standard telephone operation.
The Mobile IPTouch 600 telephone supports 8 multicast channels. The channel used is saved in the telephone memory. A PTT
call is initiated by pressing the Talk button located on the right side of the handset. All Mobile IPTouch 600 monitoring that channel
and that have enabled the PTT feature in the user preferences menu will hear the transmission through group listening.
PTT dialogue is interrupted when you answer a PBX call. When the PBX call is ended, PTT dialogue resumes if in an active call.
Activate / deactivate the PTT function
7.1
OK
FCN Push to talk
Up
OK
PTT Disabled
OR
To activate to return to the
previous page
Selecting a channel
7.2
OK
FCN Push to talk
OK
enter the to return to the
channel previous page
number
howtoc
OK
PTT Enabled
to deactivate
OK
Channel

Adjusting the volume

7.3
FCN Push to talk

Adjusting the volume level of the tones

7.4
FCN Push to talk
Initiating a call
7.5
The call period. The two-way radio operates on the concept of a push-to-talk session or call period. The push-to-talk call period
begins with the first transmission and ends when there has been no traffic on the channel for 10 seconds. The keypad cannot be
used for any other function. However, it is possible to place a PBX call.
The 'start transmit ' sound
indicates that you can start
talking'
press the 'Talk '
button
talk with the
handset 2 inches (5
cm) away
release the 'Talk '
button
25
OK OK
Audio Volume
OK OK
Tone Volume
The Mobile IPTouch 600 then
enters the waiting state
where it monitors the
channel for up to 10 seconds
adjust audio
volume
adjust audio
volume