Page 1
Alcatel OmniPCX Enterprise Mobile IPTouch 300/600...
Page 3
User manual Introduction Thank you for choosing a telephone from the mobile IP Touch range manufactured by Alcatel. Your telephone has a new ergonomic layout for more effective communication. IPTouch 300 IPTouch 600 How to use this guide Lift the receiver.
Getting to know your telephone Navigation Telephone Redial list Up-down navigation keys: used to navigate within the menus or in a text zone when ente- Appointment ring characters. Lock Functions accessible from the 'Menu' key Set idle: During a conversation: Configure the set (personal assistant, display, Settings ring tone, voice mail, etc.)
Using your telephone Other Switch on your telephone Press the on/off-hook key until you hear two beeps. Switch off your telephone Press the off/on-hook key until you hear a beep (the telephone must not be in communication). Making a call dial directly lift the number...
Make a call-back request to a busy number the number you are calling is MENU ¤Callback busy Sending DTMF signals During a conversation you sometimes have to send DTMF signals, such as with a voice server, an automated attendant or a remotely consulted answering machine.
During a conversation Other Making a second call during a conversation during a the first call is on hold conversation number of second correspondent • Other methods for calling a second correspondent 'press the ''call by name'' key directly' MENU Enquiry call number of second...
Three-way conference with internal and/or external correspondents (conference) During a conversation, a second call is on hold during a MENU ¤Conference conversation Cancel the conference and remain with your second correspondent (your first call is placed on hold) MENU End conference hang up on all correspondent After the conference, to leave your two correspondents talking together: MENU...
Intrusion into an internal conversation 2.10 Your correspondent’s line is busy. If the number is not “protected” and if authorised, you can intrude into the call: MENU Intrusion • Protection against intrusion: Intrusion protection MENU Settings Services Additional service s Intrusion protect Intrusion Protection is cancelled when you hang up.
Sharing Other Answering the general bell When the operator is absent, outside calls to the operator are indicated by a general bell. To answer: MENU Services Consultation Call pick up servi c Night call pick up Call pick-up You hear a telephone ringing in an office where no-one can answer. If authorised, you can answer the call on your own telephone. •...
Answering a call on your pager A call on your pager can be answered from any telephone within the system. your pager beeps 'answer paging' programmed key Calling a correspondent on his/her loudspeaker Your internal correspondent does not answer. If authorised, you can remotely activate your correspondent’s phone: your correspondent MENU LS announce...
MENU Consult consultating messages MENU Forward message record a comment MENU end of enter the recording destination voicemail number MENU Send send message Sending a recorded message to a number / a distribution list MENU Messaging MENU personal code recording end of recording Spell name spell the addressee's name...
Keep in touch Other Diverting calls to another number (immediate diversion) The number can be your home, portable or car phone, voice message or an internal extension (operator, etc.). display the forwarding MENU Forward status (active/inactive) select the 'diversion' function MENU Immediate forwar d MENU...
Cancelling all diversions display the forwarding MENU Forward status (active/inactive) select the 'diversion' function MENU Deactivate Diverting calls when your line is busy (divert if busy) Callers can be diverted to another telephone if you are already on the line. display the forwarding status MENU Forward...
Consulting written messages The light indicates that messages have been received. MENU Messaging new text messag e display name of sender, with Read message date, time and ranking of message After consulting the message, you can: delete the message, Delete Recall call back sender of message, forward a message to the message originator,...
Managing your charges Other Charging your calls directly to business accounts You can charge the cost of your outside calls to business account numbers. MENU Settings Services Additional service s Business account c Finding out the cost of an outside call made for an internal user from your terminal MENU Settings...
Programming your telephone Other Initializing your voice mailbox enter your personal code then record MENU Messaging your name according to voice guide instructions Modify the password for your voice mailbox MENU Messaging personal code MENU Perso options missing ggk pt Customising your voice greeting You can replace the greeting message by a personal message MENU...
Activate/deactivate the vibrator Vibrate cadence Adjusting screen brightness Phone Options Display contrast Selecting language MENU Settings Phone Language select the language apply your choice of your choice Programming your personal directory MENU Personal director y select an entry in the phone book. MENU Modify enter the name*...
• Locking the keypad Key Lock • Lock the keypad automatically You can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds. select the time period before the automatic locking • Unlocking the keypad Configure the set according to the background noise (Noise mode) 6.11 This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
Batteries and chargers howtoc Batteries Utilization precautions. Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage. The MIPT will need to have its Battery Pack recharged periodically. Autonomy.
Indicator light. When the handset or Battery Pack is seated correctly, the corresponding indicator light will come on. A bright indicator means the Battery Pack is charging, a dim indicator means the Battery Pack is waiting to charge. The indicator light will not come on when the handset is incorrectly seated, the slot is empty or when the Dual Charger has no power applied.
Push to Talk (Mobile IP Touch 600 only) howtoc The Push-to-talk feature allows the Mobile IPTouch 600 to operate in a push-to-talk (PTT) group broadcast mode in addition to the standard telephone operation. The Mobile IPTouch 600 telephone supports 8 multicast channels. The channel used is saved in the telephone memory. A PTT call is initiated by pressing the Talk button located on the right side of the handset.
SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID OLIPT300 for Mobile IPTouch 300 and FCC ID OL3IPT600 for Mobile IPTouch 600.