Manual Search; During The Search; After The Search - TechniSat EUROKLASSIK 1 Short Instructions

Digicorder satellite receiver
Hide thumbs Also See for EUROKLASSIK 1:
Table of Contents

Advertisement

9.4.4 Manual search

Should a programme not be found in the course of an automatic search, a satellite search or
a transponder search, it may be necessary to enter additional programme-specific PID
numbers for this programme. You will need to obtain these numbers on the Internet, or
possibly direct from the programme provider concerned.
The menu differs from the menu Transponder search only with regard to the menu items
PCR PID, Audio PID and Video PID. There is no need to enter the search mode.
>
Proceed as described under Transponder search.
>
Then use the arrow keys up/down to mark the lines PCR PID, Audio PID and
Video PID and use the numeric keys to enter the corresponding numbers.
>
Use the up/down arrow keys to mark the Search panel and confirm with OK.
The scan will be started. Please note any messages displayed on screen.
If no programme is found as a result of the PID search, a query message will be displayed,
asking whether this programme should be generated.
>
If you wish to generate this programme, use the arrow keys left/right to select
the field Yes, and confirm by pressing OK.
The programme will now be generated, and will be added at the end of the Favourites
list

9.4.5 During the search

While the search is still in progress, you can follow the scanning of transponders on your
screen.
The following are shown: The satellite currently being scanned (1), the number of
programmes found so far (2), the transponder last scanned (3), the last programmes found
(4), the progress of the entire scan (5) and the transponder of the satellite currently being
scanned (6).
>
You can press the red function key to abort the search.

9.4.6 After the search

When the search has been completed, a message will appear on screen indicating how
many programmes your digital receiver has found, how many of these are new programmes,
and how many are encrypted Programmes. In addition, a query will be displayed, asking
whether you wish to sort the programmes found into the TV or radio list automatically, or
whether you want them to be added automatically at the end of the list, or whether you wish
to sort them manually.
Automatic sorting
The programmes found will be sorted into the Main Favourites list in accordance with a pre-
programmed list. The order of the programmes is determined by the audio language selected
in Point 6.3.2 resp. by the country selected in Point 6.2.2.
Automatic addition
The newly found programmes are added to the end of the Main Favourites list in unsorted
order.
Manual sorting TV/ manual sorting radio
Here you will go direct to the menu Manage TV lists red. Manage radio lists. Edit these lists
as described under Point 9.1 of the operating manual.
74

Advertisement

Table of Contents
loading

Table of Contents