Timer Recordings - TechniSat EUROKLASSIK 1 Short Instructions

> Use the arrow keys up/down to mark the line with the desired action.
> Confirm by pressing OK.
The receiver will record the whole programme and then go into standby mode.
> If you switch the receiver on before the end of the programme, a query will be
displayed, asking whether you wish to start the current programme at the
Beginning, or if you wish to continue viewing Live or if you wish to switch to the
Current programme.
> Use the up/down arrow keys to mark the desired line and confirm with OK.
You select Beginning the recording will be continued in time-shift mode (Point
8.1.3).
Option 2
> Press the key Recording.
A window will then appear, showing the available functions.
> Use the arrow keys up/down to mark the line with the desired action, e.g.
+1 hour.
> Confirm by pressing OK.
The receiver will now record the programme(s) being broadcast on the channel
selected for the time period selected, and will then automatically stop recording.

8.1.2 Timer recordings

You can record programmes on the integrated hard drive in your absence, using the hard
drive timers. In addition, your receiver is equipped with video recorder timers and channel-
switching timers. In terms of their programming, these Timer types differ only in name.
During standby mode, hard drive and video recorder timers are indicated by a clock symbol.
You can programme the timers manually as described in this chapter or using the EPGplus
function as described under Point 7.16.7.2.
1. Hard drive timer
In the case of this function, your digital receiver will be switched on and off for the recording,
so this can be recorded in your absence.
If the unit was switched on by the hard drive timer, this will be indicated by "
the display. Some of the remote control functions will be deactivated (e.g. calling up the main
menu).
2. Video recorder timer
A video recorder timer is used to switch your digital receiver on and off for the selected
programme in order to record it on an external recording unit, e.g. a video recorder, in your
absence. Please note that you must programme your video recorder to record the
programme.
If the unit was switched on by the video recorder timer, this will be indicated by "
Timer" in the display. Some of the remote control functions will be deactivated.
3. Channel-switching timer
If your unit is in normal operating mode, it will switch to the programmed channel slot at the
set time.
In contrast to the hard drive or video recorder timer options, the unit remains fully functional
and is not switched off after the programme has finished.
43
PVR Timer" in
VCR