Rotating Antenna; Special Functions; Several Favourites Lists - TechniSat EUROKLASSIK 1 Short Instructions

Digicorder satellite receiver
Hide thumbs Also See for EUROKLASSIK 1:
Table of Contents

Advertisement

Polarisation
>
Use the up/down arrow keys to enter the desired polarisation plane (horizontal or
vertical).
Symbol rate
The symbol rate indicates the volume of data broadcast per second. This figure could be
shown as, for example, 27500 (27500 symbols per second).
>
Use the numeric keys to enter the correct symbol rate.
User LNB
If you have entered User LNB under the heading DiSEqC type, you can make further
settings:
LOF low band
LOF (Local Oscillator Frequency) is the frequency at which an LNB converts the received
frequency into what is known as the 1st intermediate frequency, which can then be received
by the digital receiver. So-called Universal LNBs work with 2 LOFs, in order to convert the
full frequency range of 10.7 to 11.8 GHz (low-band) and 11.7 to 12.75 GHz (high-band).
>
In this line use the numeric keys to enter the LOF of the low band of your LNB.
LOF high band
>
In this line use the numeric keys to enter the LOF of the high band of your LNB.
LOF transition
>
In this line use the numeric keys to enter the frequency at which your LNB
switches from the low band to the high band.
Signal level/quality
If you have entered the details of the test transponder correctly, the signal strength and
quality will be indicated in these lines

6.5.6 Rotating antenna

If you are operating your digital receiver in conjunction with a rotating antenna equipped with
a DiSEqC motor (Level 1.2), switch the DiSEqC control (Point 6.4.1) on and please note
Point 4.2.3 and Point 10 of the operating manual.

6.6 Special functions

This menu allows you to make the settings for CI dual decoding, as well as for the duration
for which the Infobox will be displayed, in addition to the function required to switch several
Favourites lists on or off.
>
Press the Menu key to call up the Main Menu.
>
Use the arrow keys up/down to mark the line Settings and confirm by pressing OK.
>
Now use the arrow keys up/down to mark the line Special functions.
>
Confirm by pressing OK.
The menu Special functions will be displayed.
>
Use the arrow keys up/down to mark the entry you wish to change.

6.6.1 Several Favourites lists

>
Use the arrow keys left/right to switch the function for several Favourites lists on
resp. off.
25

Advertisement

Table of Contents
loading

Table of Contents