Table of Contents
Advertisement
All the satellites included in your antenna configuration will be scanned for
Programmes. This procedure may take a few minutes. Please note any messages
displayed on screen.
Loading EPGplus data
Your digital receiver has an Electronic Programme Guide, EPGplus Electronic Programme
Guide. Your receiver must first download the EPGplus data from the satellite in order for the
Electronic Programme Guide data to be displayed.
Your receiver will start loading the EPGplus data automatically for this purpose after the
programme list update or programme scan has finished. This procedure can take up to
30 minutes.
>
If you do not want to wait for the EPGplus data to load, you can skip the process. To
do this, press the yellow function key Skip.
The EPGplus data will then be updated automatically the following night, or you can
update it manually at any time (see Point 7.16.1).
Ending the installation assistant
>
Confirm the final message of the installation assistant by pressing the green function
key Finish, to return to normal operation.
17
Advertisement
Chapters
Table of Contents
