Snom 360 Manual page 12

1
Fig. 5
used when the phone is mounted on a wall. After connecting the phone
(see chapter Setting up the Phone, above), form the cords into loops and
gently press the long ends into the slots on the footstand (Fig. 6). If the
loops are too big they will hamper the secure mounting of the phone on
the wall; if they are too small they might bend or break the cords.
position of the holes to be drilled in the wall.
profi les (diameters of screws dmax= 4.5 mm (0.1755"), diameters of
heads dmax=8.5 mm (0.3315").
for easy wall mounting of the phone.
that fi ts over the rounded end of the plastic tab inserted into a slot on
the top shell of the phone. When the phone is mounted on the wall, the
12 • Installation
VoIPon www.voipon.co.uk
[ 3 6 0 U
S N O M
(6) The slots on the footstand for the various cords can also be
The delivery includes a template to be used for marking the
(Use wall plugs, if necessary, and screws with half-round head
The screws must protrude approx. 0.5 cm (0.195") from the wall
Adjusting the Handset Rest
The speaker of the handset has a small, rectangular indentation
sales@voipon.co.uk
M V 1 . 0 0 ]
S E R A N U A L
Fig. 6
Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030