Conducting A Software Update - Snom 360 Manual

you are in user mode; pressing
password will switch the phone to administrator mode. The default admin
istrator password is '0000' (four zeros).
user.
available, as indicated by the letters 'SW' in the lower left corner of the
display just above the "soft key" line of the idle screen. See section
Conducting a software update, below.
4
received via the phone.
is displayed.
default Admin password '0000' (four zeros). It is highly recommended
that you reboot your phone after a reset!

Conducting a Software Update

in the lower left corner of the display just above the "soft key" line of the
idle screen:
60 • Advanced Functions
VoIPon www.voipon.co.uk
[
S N O M
The maintenance menu has the following options:
User Mode/Administrator Mode
If you see 'User Mode', you are in administrator mode; pressing
will switch the phone to user mode. I you see 'Administrator Mode',
In User mode, some settings are not accessible to the phone's
Software Update
A software update is possible only when a fi rmware update is
Net Info
This option displays live the number of IP packets sent and
Mem Info
Here, the amount of total and free memory space of the phone
Reboot
Use this option if you want to reboot your phone.
Reset Values
If you want to set your phone back to factory defaults, type in the
When a fi rmware update is available, the letters 'SW' are shown
sales@voipon.co.uk
3 6 0 U M
S E R A N U A L
and then entering the administrator
Tel: +44 (0)1245 808195
V 1 . 0 0 ]
Fax: +44 (0)1245 600030