Setting Up The Phone; Wall Mounting - Snom 360 Manual

phone's bottom shell (shaded gray in Fig. 1). Place the snom 360 on an
even, horizontal surface that gives the rubber pads a secure grip. Do not
1
place it on carpets or other materials containing fi bers that could block the
air vents and cause overheating.
below), clip the cords into the appropriate slots on the footstand or, in the
case of the handset cord, on the bottom shell of the phone (Fig. 2).
Fig. 1
It is also possible to mount the snom 360 on the wall. In order to do this,
detach the footstand from the bottom shell and attach it in the appropriate
position for wall mounting, as described in steps 1 through 6, below.
(1)
damage the display and/or its hinge and that you do not drop the receiver. You
may want to hold the phone in your lap or have a second person hold it.
10 • Installation
VoIPon www.voipon.co.uk
[ 3 6 0 U
S N O M

Setting up the Phone

Your snom 360 is delivered with the footstand attached to the
After connecting the phone (see chapter Connecting the Phone,

Wall Mounting

CAUTION: Do not mount the keypad expansion module available
for the snom 360 on the wall. If you wish to use the module, you
must place phone and module on an even, horizontal surface, as
described above.
Turn the phone upside down (Fig. 3). Please ensure that you do not
sales@voipon.co.uk
M V 1 . 0 0 ]
S E R A N U A L
Fig. 2
Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030