Line - Snom 360 Manual

respective programmable key at any given time.
accepts the call.
by the constantly lit LED, puts the call on hold.
key, with the receiver in the cradle, returns the phone to idle state.
key, with the receiver off the hook, erases the number.
3
42 • Basic Functions
VoIPon www.voipon.co.uk
[ 3 6 0 U
S N O M
Each of these keys has an LED indicating the status of the
Some features are common to all keys:
Pressing a key when its LED is blinking and the phone is ringing
Pressing a key when a call is in progress at that key, as indicated
Pressing a key twice while editing a number for dialing at that
Pressing the key twice while editing a number for dialing at that
Each of these different options will now be explained in detail.

Line

‚Line' can be used in one of the following ways:
a. To map a local SIP line: A user can assign the local lines
to programmable keys by selecting this option and setting
the URL of the local line as argument to that key setting. For
example, if a phone has two registrations, 501@my.proxy.com
and 502@my.proxy.com, the user has the option to map two
programmable keys to each one of these lines by selecting
‚Line' and setting the respective SIP URL as argument. In this
case, all the calls to a particular line will go to its matching
programmable key, e.g., if 502@my.proxy.com is mapped at
key P2, the LED on that key will start blinking when there is
an incoming call on that line. Similarly, if the user presses P2
in the idle state with the receiver on hook, 502@my.proxy.
com will become the active line for that call.
enables the customer to use his different SIP accounts as he
would use different PSTN phone lines. It is also possible to
assign different ringtones to each SIP line in order to make an
acoustic differentiation. This can be done either on the proxy
or on the phone's web interface page Confi g Line 1-12.
sales@voipon.co.uk
M V 1 . 0 0 ]
S E R A N U A L
Tel: +44 (0)1245 808195
This feature
Fax: +44 (0)1245 600030