Table of Contents
Advertisement
DETACHING/ATTACHING THE SMART EXTRUDER
If you need to remove the Smart Extruder from your MakerBot Replicator Mini, first unload
any filament. Wait for the Smart Extruder to cool to 50° C, then pull it away from the extruder
carriage.
To attach the Smart Extruder, press it against the back of the extruder carriage, with the
connector pins facing the extruder carriage. Magnets will lock the Smart Extruder into
place. If MakerBot Desktop doesn't recognize the Smart Extruder, open the print monitor
panel and click Attach Smart Extruder.
HOW TO TAKE A PHOTO
You can take a photo of your print at any time using the built-in camera in the MakerBot
Replicator Mini. Open the print monitor panel in MakerBot Desktop, mouse over the camera
view, and click Take a Photo. MakerBot Desktop will take a photo and let you save it to your
local computer. You must be connected to a Wi-Fi network to use the camera.
Warning: Always use caution when handling the Smart Extruder. Never remove the
Smart Extruder during or immediately after printing. Wait until the Smart Extruder has
cooled to 50° C before handling it.
24
REFERENCE
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Replicator Mini Compact and is the answer not in the manual?