Quick Steps For Connection & Setup - Olivetti DP Technical Information Manual

Quick Steps For
Connection &
Setup
Quick Steps for printer connection and setup, for use by the
experienced System Administrator, are provided within this section.
Quick Steps common to virtually all platforms include:
1. Install cabling to link the Network Interface to your network.
2. Print a Configuration Sheet from the printer's Control Panel to
determine the printer's total memory, current Network settings,
and all current printer settings. See the section "Print the
Configuration Sheet" (page 2-11).
3. If you are connecting this printer using TCP/IP protocol, refer
to the section "Set An IP Address" (page 2-4).
4. Go to the appropriate chapter(s) within this Technical
Information Guide (TIG) covering your workstation Operating
System (for example, Windows; Macintosh; UNIX; OS2) and
follow the setup instructions provided.
5. If your job doesn't print correctly, refer to the Troubleshooting
section within the applicable Operating System chapter of this
TIG for problem-solving information.
Chapter 2: Connecting to Your Network
Quick Steps For Connection & Setup
2-3