Using Quick Setup - Olivetti d-Color P20W Network User's Manual

UTILITY
Telnet
SNMP
U Q
SING UICK
Quick Setup utility allows you to configure the network interface
easily and simply without installing any software packages.
You can configure the following:
> Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI
protocols.
> Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare mode and create Queue/Print Server/Printer
objects.
> Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows 2000 Advanced
Server/Professional or Windows XP running TCP/IP or IPX/SPX
(NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/SPX.
This utility must be used on a PC that is located on the same
segment as the printer.
To create a NetWare queue, NetWare Client 32 or IntranetWare
Client should be installed in your system.
The following explanation uses Windows 98 as an example.
FEATURES
Configure the NIC using
TELNET.
The printer and network
card can be controlled
using third-party
vendor developed SNMP
application.
S
ETUP
Network Configuration> 9
SYSTEM
REQUIREMENTS
Third-party vendor
developed TELNET
client package.
A TELNET Application is
standard in Windows/
UNIX/Linux.
Third-party vendor
developed SNMP
application.