Selecting The Printer From The Chooser - Olivetti DP Technical Information Manual

Macintosh Driver Installation
5-6 DP Technical Information Guide

Selecting the Printer from the Chooser

Before continuing, make sure that the software included with your
customer documentation set has been loaded into each Macintosh
computer that will be sending jobs to the DP printer.
Before you send a print job to the DP printer, make sure that it is
selected as the current printer in the Chooser.
1 Use the mouse and place the cursor over the APPLE in the upper
left corner of the Desktop.
Press the mouse button down and hold it down. A drop-down menu
2
will appear. DRAG the mouse down until it highlights the Chooser
entry in the menu, then release the mouse button.
In the left window of the Chooser, click on the DP icon to select it.
3
You may have to use the scroll bars at the right side of this box to
locate the icon.
Your network may be divided into AppleTalk Zones. You can
tell if there are zones by the appearance of the CHOOSER
window. When the CHOOSER program detects multiple
zones, the left window will be reduced in size. The lower half
of the CHOOSER window will be a zone list. Identify, then
select the zone in which the DP printer is located.
When you select a zone, printer names appear in a box to the right.
4
5 Select DP from the window to the right if it is not already selected
by default.
Click Setup...
6
If you do not use the DP driver, you may not be able to take
advantage of all of the printer's features.
FOR FIRST TIME INSTALLATIONS
Highlight the PPD for your DP printer. Click Select.
7
Configure your driver with the options installed on your printer.
8
Go to Step 14.
9