Sharp MX-FXX1 Service Manual page 73

System Settings for Fax (Administrator): Date/Own Number
Print Position Setting
This is used to set the position where the sender information is
printed. The sender information can be printed outside the scanned
original image or inside the scanned original image.
Outside scanned image (factory
default setting)
Sender information
Original
The transmitted image length will
be: length of sender information +
length of original image. When the
fax is printed by the receiving
machine, it may be reduced or
divided onto two pages.
Inside scanned image
Sender information
Original
The sender information is printed
inside the original image, and thus
the transmitted image length is the
length of the original. Note that the
sender information will overlap part
of the original image (that part of the
original image will not appear).
MX-FXX1 MACHINE OPERATION 7 – 4