Sharp MX-FXX1 Service Manual page 29

SW Bit
Item
No. No.
4 3-4 Call sound volume
5-6 Line monitor volume
setting
7-8 Volume of the
transmission
completion sound
(Volume of the
successful
transmission sound)
5 1-2 Volume of the
communication error
completion sound.
(Volume of the
transmission and
reception error sound)
3-4 Volume of the
reception completion
sound (Volume of the
reception completion
sound)
5-6 Tone of the successful
transmission sound
7-8 Tone of the
transmission error
sound
6 1-2 Tone of the reception
sound
3-5 Setting of the
successful
transmission sound
time
6-8 Setting of the reception
sound time
SW selection and function
Irrespective of whether there is a handset, this sets the volume of the
call sound that is sounded when a signal arrives.
Volume is available in four types as follows.
"00": No sound
"01": Small
"10": Medium
"11": Large
Set the speaker volume during line monitoring.
Volume is available in four types as follows.
"00": No sound
"01": Small
"10": Medium
"11": Large
Set the volume of the completion sound outputted from the speaker
upon completion of FAX transmission.
Volume is available in four types as follows.
"00": No sound
"01": Small
"10": Medium
"11": Large
This sets the volume of the completion sound outputted from the
speaker upon completion of FAX communication error.
Volume is available in four types as follows.
"00": No sound
"01": Small
"10": Medium
"11": Large
This sets the volume of the completion sound outputted from the
speaker upon completion of FAX reception.
Volume is available in four types as follows.
"00": No sound
"01": Small
"10": Medium
"11": Large
This sets the tone sounded when transmission is successful.
"00": Pattern 1 (550Hz)
"01": Pattern 2 (750Hz)
"10": Pattern 3 (1000Hz)
"11": Pattern 4 (1700Hz)
This sets the tone sounded when there is a transmission error.
"00": Pattern 1 (550Hz)
"01": Pattern 2 (750Hz)
"10": Pattern 3 (1000Hz)
"11": Pattern 4 (1700Hz)
This sets the tone sounded upon completion of reception.
"00": Pattern 1 (550Hz)
"01": Pattern 2 (750Hz)
"10": Pattern 3 (1000Hz)
"11": Pattern 4 (1700Hz)
This sets the time the tone is sounded when transmission is successful.
"000": 2.0 seconds
"001": 2.5 seconds
"010": 3.0 seconds
"011": 3.5 seconds
"100": 4.0 seconds
The initial value is reverted to if a value outside of the setting range is
set.
This sets the time the tone is sounded upon completion of reception.
"000": 2.0 seconds
"001": 2.5 seconds
"010": 3.0 seconds
"011": 3.5 seconds
"100": 4.0 seconds
The initial value is reverted to if a value outside of the setting range is
set.
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 20
Initial value
1 Medium FAX initial
setting
0
1 Medium (North America/ FAX initial
Australia/Sweden/Finland/ setting
0
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/New
Zealand/China/Singapore/
Indonesia/Thailand/
Malaysia/India/Philippine/
Hong Kong/Taiwan/Middle
East/Slovakia/Other3/
South Africa/Spain/
Portuguese/Luxemburg/
Belgium/Czech/Hungary/
Greece/Poland)
0 No sound (U.K./France/
Germany/Rusia)
0
1 Medium FAX initial
setting
0
1 Medium FAX initial
setting
0
1 Medium FAX initial
setting
0
1 Pattern 3 (1000Hz) FAX initial
setting
0
1 Pattern 3 (1000Hz) FAX initial
setting
0
1 Pattern 3 (1000Hz) FAX initial
setting
0
0 3.0 seconds FAX initial
setting
1
0
0 3.0 seconds FAX initial
setting
1
0
System
settings