Sharp MX-FXX1 Service Manual page 38

SW Bit
Item
No. No.
33 5 EOL detection timer
6-8 Not used
34 1-2 Not used
3-6 Modem transmission
speed (Other than
V.34) (DCS)
7-8 Fixing of modem
speed during reception
(Other than V.34) (DIS)
35 1-2 [Line1] Coding
capacity during
transmission and
reception (V.34
communication)
(reflected in DIS/DCS/
DTC)
3-4 [Line1] Coding
capacity during
transmission and
reception (other than
V.34 communication)
(reflected in DIS/DCS/
DTC)
5-6 Not used
7-8 Image capacity when
polling (Reflected in
DTC)
36 1-7 Not used
SW33, 6-8 Initial value
"010": North America
"001": Australia/U.K./France/Germany/Sweden/Finland/Norway/Denmark/Netherlands/Italy/Switcherland/Austria/New Zealand/China/Singapore/Indonesia/
Malaysia/India/Philippine/Hong Kong/Middle East/Slovakia/Other3/Spain/Portuguese/Luxemburg/Belgium/Czech/Hungary/Greece/Poland
"011": Taiwan
"100": Thailand/Rusia/South Africa
SW selection and function
Setting to determine how many seconds to set the detection timer for
EOL (EndOfLine) during Phase-C reception in G3.
"1": Setting to 25 seconds
"0": Setting to 13 seconds
When error occurs in EOL detection, treat as non-detection of EOL.
This sets the initial speed (upper limit) in transmission of other than
V.34. Reflect in DCS.
When the default setting is made, V.17 14400bps is notified to the other
party's machine.
Communication does not always happen at this speed.
"0000": V.27ter 2400bps "1000": V.17 14400bps
"0001": V.29 9600bps "1001": V.17 9600bps
"0010": V.27ter 4800bps "1010": V.17 12000bps
"0011": V.29 7200bps "1011": V.17 7200bps
"0100": V.33 14400bps "1100": V.17 14400bps
"0101": V.17 14400bps "1101": V.17 14400bps
"0110": V.33 12000bps "1110": V.17
"0111": V.17 14400bps "1111": V.17
This sets the initial speed (upper limit) in transmission of other than
V.34.
When the default setting is made, V.17 14400bps is notified to the other
party's machine.
Communication does not always happen at this speed.
"00": Not fixed
"01": V.29-9600bps
"10": V.27ter-4800bps
"11": V.17-14400bps
This sets the coding capacity that is communicated to the other party's
machine in V.34 communication.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
This sets the coding capacity that is communicated to the other party's
machine in communication other than V.34.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
This sets the image capacity of the machine when polling.
Reflect in DTC.
"00": Very fine
"01": Fine
"10": Small letters
"11": Ordinary lettering
Control the image capacity when receiving by means of "Image
capacity when receiving."
For 600dpi, set by means of "600dpi resolution capacity setting
(reflected in DTC)."
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 29
0 13 seconds
0 Refer to "SW33, 6-8 Initial
value"
1
0
0
0
1 V.17 14400bps
0
0
0
14400bps
14400bps
0 Not fixed
0
0 JBIG/MMR/MR/MH
0
0 JBIG/MMR/MR/MH
0
1
1
0 Very fine
0
0
0
0
0
0
1
0
System
Initial value
settings