Key Repeat Initial Delay
When a key is touched repeatedly, this is the delay before the key begins repeating. The delay ranges from 0.25
seconds to 5 seconds. The default is 1 second. Values are given in increments of 0.25 seconds.
To change this setting:
1.
Touch
2.
Touch
3.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
Key Repeat Rate
This is the number of times per second that a repeating key will repeat. The range is 1–100, with a default of 15
times per second.
To change this setting:
1.
Touch
2.
Touch
3.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
Wiper Message
To change this setting:
1.
Touch
2.
Touch
3.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
Exit Configuration Menu
Exit
Config Menu
to select Key Repeat Initial Delay from the Configuration Menu.
to increase the value or
to select Key Repeat Initial Delay from the Configuration Menu.
to increase the value or
to select Wiper Message from the Configuration Menu.
or
to change the value. The values are On (default) and Off.
Touch Exit Config Menu to exit the Diagnostics Menu, and Resetting the Printer
displays. The printer performs a POR, and the printer returns to normal mode.
to decrease the value.
to decrease the value.
4036-307/308
3-11
Diagnostic aids