Table of Contents
Advertisement
4036-307/308
User attendance messages
Additional messages may appear, and most are documented in the Menus and Messages Guide for this option
and the Service Manual for the base printer. The messages listed below pertain to the scanner portion rather
than the base printer.
User attendance messages
Error
Sub
Display text
code
codes
Clean scanner
glass
Disk Full – Scan
Job Canceled
Fax Memory Full
2-6
Service Manual
Description
During a scanner calibration,
the firmware detects that a
scanner ADF or the flatbed
(scanner) glass may be dirty.
The scan job cancels or stops
due to insufficient hard disk
space.
There is no memory to
complete a fax job. Any
attempted fax jobs are
canceled.
Action
Touch Cancel Job if a scan job is
processing when the attendance message
appears. This cancels the job and clears
the message.
Touch Scan from Automatic Document
Feeder if the page jam recovery is active.
Scanning resumes from the ADF
immediately after the last successfully
scanned page.
Touch Scan from flatbed if page jam
recovery is active. Scanning resumes from
the flatbed immediately after the last
successfully scanned page.
Touch Finish job without further
scanning if page jam recovery is active.
The job ends at the last successfully
scanned page, but the job is not canceled.
Successfully scanned pages go to their
destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active
and the job is restartable. The message
clears. A new scan job containing the
same parameters as the previous job
starts.
Note: The scanner finishes scanning
currently committed pages in the ADF, but
data is lost when the job cancels itself.
Touch Continue to clear the message.
Touch Continue to clear the message.
Advertisement
Table of Contents
