Table of Contents
Advertisement
Format Fax Storage
This setting enables you to format the non-volatile storage used for storing faxes.
To change this setting, touch
Fax Flash DO NOT POWER OFF appears on the LCD while the format operation is active.
Note: If an advanced password has been established, you must enter this password in order to change the
setting.
ADF Edge Erase
The ADF Edge Erase and FB Edge Erase settings specify, in millimeters, the size of a border around the
scanned image that will be erased. For copies, the printed page will have a 2 mm no-print border. The larger of
the 2 mm no-print border and the Edge Erase setting will be used in this situation.
To change this setting:
1.
Touch
The panel displays the setting's name in the header and
row.
2.
Touch
3.
The values are 0 through 6. The default is 3.
4.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
FB Edge Erase
The ADF Edge Erase and FB Edge Erase settings specify, in millimeters, the size of a border around the
scanned image that will be erased. For copies, the printed page will have a 2 mm no-print border. The larger of
the 2 mm no-print border and the Edge Erase setting will be used in this situation.
To change this setting:
1.
Touch
The panel displays the setting's name in the header and
row.
2.
Touch
3.
The values are 0 through 6. The default is 3.
4.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
to select Format Fax Storage from the Configuration Menu. Formatting
to select ADF Edge Erase from the Configuration Menu.
to increase the value or
to select FB Edge Erase from the Configuration Menu.
to increase the value or
[setting's current value]
to decrease the value.
[setting's current value]
to decrease the value.
4036-307/308
below the header
below the header
3-7
Diagnostic aids
Advertisement
Table of Contents
