Hooking Up Optional Components - Sony DHC-AZ7DM Operating Instructions Manual

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component. DHC-AZ3DM is used for illustration purposes.
TV
To the video input jack
of the TV
To the component
video input jack of the
TV or projector
TV or projector
A VIDEO/SAT IN L/R jacks
Use audio cords (not supplied) to connect an
optional analog component (VCR or satellite
tuner, etc.) to these jacks. You can then record or
listen to from the component through this
system.
TV
To the S video
input jack of the TV
To the audio input
jack of the connected
component
VCR or MD deck, etc.
B VIDEO/SAT OUT L/R jacks
Use audio cords (not supplied) to connect an
optional analog component (VCR or MD deck,
etc.) to these jacks. You can then output audio to
the component from this system.
Note
If you press AUDIO, SOUND FIELD or the buttons
related to karaoke mode, or if you connect or
disconnect microphones or headphones, the sound cuts
off for a moment.
Amplifier
To the digital input jack of
the digital component
From the audio output
jack of the connected
component
VCR or satellite tuner, etc.
continued
GB
79