Custom Settings; Custom Setup - Sony DHC-AZ7DM Operating Instructions Manual

About DVD software types and
the conversion method
DVD software can be divided into 2 types: film-
based software and video-based software.
Video-based software is derived from TV, such
as dramas and sit-coms, and displays images at
30 frames/60 fields per second. Film-based
software is derived from film and displays
images at 24 frames per second. Some DVD
software contains both video and film.
In order for these images to appear natural on
your screen when output in progressive format,
the progressive signals need to be converted to
match the type of DVD software that you are
watching.
Note
When you play video-based software in progressive
signal format, sections of some types of images may
appear unnatural due to the conversion process when
output through the COMPONENT VIDEO OUT jacks.
Even though you set to "PROGRESSIVE AUTO" or
"PROGRESSIVE VIDEO", images from the VIDEO
OUT jack are unaffected as they are output in the
interlace format.

Custom settings

— CUSTOM SETUP

Use "CUSTOM SETUP" to set up playback
related and other settings.
Select "CUSTOM SETUP" in the Setup
Display.
To use the Setup Display, see "Using the Setup
Display" (page 41).
x PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
The default setting is underlined.
AUTO The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
FRAME The picture, including subjects
that do not move dynamically, is
output in high resolution.
x TRACK SELECTION (DVD VIDEO only)
Gives the priority to the sound track which
contains the highest number of channels when
you play a DVD VIDEO on which multiple
audio formats (PCM, DTS, MPEG audio or
Dolby Digital format) are recorded.
The default setting is underlined.
OFF No priority given.
AUTO Priority given.
continued
GB
45