Optional Components; Hooking Up Optional Components - Sony CMT-CEP313 Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
Optional analog component
A MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See "Hooking up optional components" on
page 15.
2
Press MD.
Start playing the connected component.
From the audio output
jacks of an optional
analog component
Recording audio from a
connected component
1
Connect audio cords.
2
Start recording manually.
See "Recording on a tape manually" on
page 11.
GB
15