Display
Turning off the display
— Power Saving Mode
The demonstration display (display window and
buttons lighting even when the system power is
off) and the clock display can be turned off to
minimize the amount of power consumed during
standby (Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display t Clock display* t
No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Tips
• The timer continues to operate in Power Saving
Mode.
?/1
•
indicator lights up even in Power Saving Mode.
Adjusting the brightness
of the display
Press DIMMER on the unit repeatedly to
turn the display on or off while the system
is on.
Each time you press the button, the display
changes cyclically as follows:
DIMMER 1 t DIMMER 2* t
DIMMER OFF
* DIMMER 2 is the darkest.
Page 68