Alert Setup - Emerson CSI 9420 Reference Manual

CSI 9420

Alert Setup

Figure 2-25. AMS Device
Manager screen for 900 MHz
device.
2-30
To configure alarm limits for the various measurement variables, select the
"Alert Setup" branch of the Configure tree. These tabs display all the user
configurable alarm parameters, based on the sensor configuration of the
device.
900 MHz version
The AMS Device Manager screens are different in the 900 MHz device. An
example screen for setting alert thresholds in the 900 MHz device is shown in
Figure 2-25. To access the screen, right click on the device and select
"Configure/Setup" from the menu.
To configure alarm limits for the variables exposed by the device, select the
sub menu option "Alarm Levels" under the "Configure/Setup" menu on the left.
Based on the sensor configuration of the device, you will see all the available
parameters that have user configurable alarm limits.
Reference Manual
MHM-97408.5
April 2010