For Wired Network Interface Users; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-7840W Quick Setup Manual

Installing the Driver & Software

For Wired Network Interface Users

5
®
For Mac OS X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 10.
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Connect the network interface cable to the
machine, and then connect it to your network.
3
Turn on your Macintosh
4
Put the supplied CD-ROM for Macintosh
your CD-ROM drive.
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please see the Network User's Guide on the CD-
ROM if you want to install the PS driver.
6
Choose Wired Network Connection
(Ethernet), and then click Next.
The installation will continue.
7
The Brother software will search for the Brother
device. During this time the following screen
will appear.
®
.
®
into
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step 8.
• If this screen appears click OK.
Enter a name for your Macintosh
Name up to 15 characters long and click OK. Go
to step 8.
• If you want to use the machine's Scan key to scan
over the network you must check the Register
your computer with the "Scan To" function on
the machine box.
• The name you enter will appear on the machine's
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning in the Software User's Guide on the CD-
ROM.)
8
When this screen appears, click OK.
®
For Mac OS X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 13.
Macintosh
®
in Display
19
®