Macintosh; For Usb Interface Cable Users; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-7840W Quick Setup Manual

STEP 2
Installing the Driver & Software

For USB Interface Cable Users

4
For Mac OS
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 10.
Note
For Mac OS
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com/)
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Connect the USB interface cable to your
computer, and then connect it to the machine.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
3
Turn on your Macintosh
4
Put the supplied CD-ROM for Macintosh
your CD-ROM drive.
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please see the Software User's Guide on the CD-
ROM if you want to install the PS driver.
6
Choose Local Connection (USB), and then
click Next. The installation will continue.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
18
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
®
.
7
The Brother software will search for the Brother
device. During this time the following screen
will appear.
8
When this screen appears, click OK.
For Mac OS
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 13.
9
For Mac OS
Click Add.
10
Choose USB.
11
Choose your model name, and then click Add.
®
into
12
Click Print Center, then Quit Print Center.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
13
To install Presto!
the Presto! PageManager icon and follow the
on-screen instructions.
Presto!
installed and the installation is now
complete.

Macintosh

®
X 10.3.x or greater users:
®
X 10.2.4 to 10.2.8 users:
® ®
PageManager , double-click
® ®
PageManager has been
®